USB COB LED strip, 2 m, touch-dimmable
NewA line of light along the top edge of the case, dimmed to taste from a USB socket. The cheapest way to make a case look like a showroom.
Why we recommend it
A two-metre self-adhesive strip of COB LEDs, the kind with a continuous line of light rather than visible dots, with a touch dimmer on the lead and a USB plug on the end. Stick it along the inside top edge of a case or under a shelf, plug it into a USB socket or a power bank, and the cars are lit from above, every row the same.
Light is what makes a spectraflame or a metallic paint do its thing, and room light from across the shelf never reaches the back of a case. A strip inside the case does, and a COB strip does it without hot spots on the acrylic. The dimmer matters more than it sounds: full brightness washes out white cars, a third of it makes the whole case glow. Two metres is enough for the top edge and one shelf of a wall case, with some to spare.
What to know: this strip is cool white, around 6000 K, which reads crisp and a touch blue; if you want silver cars to stay silver, look for a 4000 K neutral strip from the same makers, and never buy warm white for a display, it turns everything yellow. It wants a proper 5 V, 3 A USB supply; a weak phone charger makes it flicker. Cut it only at the marked points, and plan the run before you peel the backing.
What to look for
- COB, not SMD: a continuous line of light, no dots reflected in the acrylic.
- A dimmer on the lead. You will use it.
- Colour temperature: 4000 K neutral shows paint as it is; 6000 K is crisp and cool; under 3000 K goes yellow.
- A 5 V, 3 A USB supply, not a phone charger.
Fits
Any acrylic case, wall cabinet or shelf with an edge to stick to.